Interior painting
Interior painting in Tyler that starts with the wall, not the color
Patch, prime, then two coats of low-VOC Sherwin-Williams, with the sheen chosen for how each room actually gets used.
Chapter 01
Humidity gets inside the house too
Tyler homes run the air conditioning for eight to nine months of the year. The gap between cool interior walls and hot exterior surfaces pushes condensation into bathroom walls, laundry rooms and kitchens, and homes with weak ventilation can grow mold on bathroom ceilings and behind vanities. Painting over active mold without treating it first guarantees it comes back, so mold-affected surfaces are treated during prep, before any primer or paint.
The flat paint on most new construction around Tyler and Whitehouse is made to look good at move-in, not to survive daily life. Hallways, kitchens and kids’ rooms scuff and stain inside the first year, and flat paint traps moisture instead of shedding it. The right coating plus honest prep takes care of both problems before the new coat goes on.
A freshly repainted living room finished by the Quality Coats crew
Wall repair and primer decide how the finish looks
Nail pops, cracks, screw holes and other defects are patched with joint compound and sanded smooth. Popcorn texture matching, skim coat repairs and corner bead fixes happen at this stage too. It is the step that sets the quality of the finished wall, and it is not skipped to save time.
A patch is more porous than the wall around it. Paint put straight over it flashes, and the repair shows as a dull spot under raking light. So every repair is primed to the same porosity as the surrounding wall before the topcoat. When a color change goes from dark to light, the whole wall gets primer so two topcoats hide evenly.
Furniture is moved or covered, floors get drop cloths, and trim and outlets are masked before any of this starts. You do not need to empty the room.
Chapter 03
Sheen and product, matched to the room
Not every room needs the same paint. Sherwin-Williams Emerald Interior is the low-VOC, stain-blocking workhorse for walls and ceilings, available from flat through semi-gloss. In eggshell or satin it scrubs clean in hallways, kitchens and family rooms, where builder flat gives out within months.
Regal Select goes on bedrooms, living rooms and other low-humidity spaces where a soft, even finish matters most, and it hides well in one topcoat over primed drywall. Baseboards, door casings and window trim get ProClassic Alkyd, which levels to a hard semi-gloss without brush marks and holds its white on the sunny windows common in Tyler.
Two full coats go on every wall, with the second coat waiting for full first-coat dry time. Most Tyler interiors take three to five days, and a single room takes one to two. A production manager walks every room with you before the crew leaves, and the written 3-year labor warranty starts at sign-off.
Quality Coats carries liability insurance and workers’ compensation on every job. Every interior project closes with a room-by-room walkthrough and a written 3-year labor warranty.
Before the roller
The checklist every room gets before it gets color
- Floors and furnitureDrop cloths on every floor, furniture moved or covered, trim and outlets masked.
- Pops, cracks and holesNail pops, cracks and screw holes patched with joint compound and sanded smooth.
- Texture and cornersPopcorn texture matched, skim coats and corner bead repaired where the wall needs it.
- MoldAny mold-affected surface treated before primer goes on.
- PrimerEvery repair, bare patch and stained spot primed. Dark to light gets the full wall.
- Dry timeThe second coat goes on only after the first has fully dried, not to beat a deadline.
“The prep work, attention to detail, and final walkthrough really sets them apart from the other companies and contractors we’ve used previously at our property.”
See a finished room in the living room repaint, or read the full preparation process.